Contaminated Soil
PCB Task Force
1998 PCB Mega Rule
Workplace Regulations
Take Action
Terms of Use

PCB Contaminated Soil Due To Intact Masonry Caulk

 

Here is a study that shows intact PCB-laden masonry caulking causing soil contamination.

This study contradicts the position held by state and federal regulatory agencies that PCB-laden caulk has to be in direct physical contact with the soil in order to cause contamination. Contamination is probably due to erosion, weathering and/or leaching of PCBs.

Read the following study in Environmental Health Perspectives

Soil Contamination from PCB-containing Buildings
Robert F. Herrick, Daniel J. Lefkowitz, George A. Weymouth
doi:10.1289/ehp.9646 (available at http://dx.doi.org/)
Online 6 November 2006

Soil contamination due to PCBs in caulk at MIT September 2006 Read both information sheets from MIT MIT Information Sheet #2 Sept. 2006 & MIT Information Sheet


Intact PCB-laden masonry caulking one foot above soil.

 

Sampling and photo sent by anonymous individual.

   

Sampling of soil, one foot below intact PCB-laden masonry caulking.

 

 

Sampling and photo sent by anonymous individual.

Sampling results showed soil contaminated with PCBs.

Sampling yielded 34 ppm of PCBs.

19 ppm of Aroclor 1254
15 ppm of Aroclor 1260

See report below.

Job number, Lab Sample ID and Name were erased to protect identity of individual taking the sample.

 

__________________________________________________________________________

*To add to the database, please forward caulking and soil laboratory sample results to info@pcbinschools.org. The identity of sender will remain anonymous.

To access PDF files, you need Adobe Acrobat Reader installed Download Acrobat Reader

__________________________________________________________________________

Dr. Daniel Lefkowitz | ph: 914-245-8671| Email: info@pcbinschools.org

(c) 2005